How shall I access D-link router by using 192.168 0.1?
Introduction
The D-Link router’s web- interface is the main dashboard where you can manage or configure its settings. It’s the control panel where you can configure a range of important settings including wireless and security settings, port forwarding, guest Wi-Fi access, and more. To access the dlink router setup dashboard, you need the IP address of the router.
For most D-Link routers, 192.168.0.1 is an IP address that lets you access the Dlink router login admin panel. When you’re unable to access the router’s interface through dlinkrouter.local, then you can use this default IP. In this article, we’ll explain to you how to access your D-Link router using 192.168 0.1.
Find the Dlink router login IP address
The D-Link default IP address is often found in the manual that came with the device or printed on the product’s label. If you have lost the device’s manual, then you can get your router’s IP by following the steps mentioned below.
● Go to your PC and open the Windows Command Prompt.
● Now, type ipconfig into the given box.
● The next window will then appear with some information.
● Look for the IP address, subnet mask, and the default gateway.
● Now, copy the default gateway address and type it in your browser’s address bar to access the Dlink setup wizard page.
Access the Dlinkrouter.local page through 192.168 0.1
● Connect one of your client devices such as a PC to the D-Link router with the Ethernet cable.
● Next, open a web browser and type http://192.168.0.1 or http://192.168.1.1 in the address field.
● When a login page appears, enter the dlink router login credentials like the username and password, and then click on Login.
● Now, run the quick setup wizard and follow the prompts on the screen.
● Navigate to the Wireless settings to configure the SSID name and password of the dlink wifi router.
● Under the WAN Setup, choose your internet connection type.
● Finally, click Save and Connect.
How to change the D-Link default IP address?
● Launch a browser and type 192.168.0.1 or dlinkrouter.local in the address field.
● Now, enter the Dlink default username and password. Click Login.
● From the d link wifi setup page, click on the Network Settings.
● Under Router Settings, enter a new IP address and subnet mask.
● You can use this IP address whenever you want to access the web configuration page of the router.
● Now, save the changes by clicking on the Apply tab.
Conclusion
This was all about how to set up the D-Link router using 192.168 0.1. In case, you cannot access the web-based management page of the router through the customized IP address, you can reset the Dlink router to the factory defaults. And then, try accessing the dlink router using the default IP address. If you have more queries or issues with your D-Link wifi router, you can get in touch with the team of experts. You can call us on our helpline number or do a live chat.
